Why?

This blog is to help you in preparing for an emergency. It also contains other information that you might find spiritually up-lifting. This is not an official website of "The Church of Jesus Christ of Latter-day Saints". This site is maintained by Barry McCann (barry@mail.com)

Friday, November 30, 2018

62 Percent Of All U.S. Jobs Do Not Pay Enough To Support A Middle Class Life

We just got more evidence that the middle class in America is rapidly disappearing.  According to a shocking new study that was just released, 62 percent of all jobs in the United States do not pay enough to support a middle class life.  That means that “the American Dream” is truly out of reach for most of the country at this point.  Today, Americans are working harder than ever but the cost of living continues to rise much faster than our paychecks are increasing.  Earlier this month, I went and looked at the latest numbers from the Social Security Administration, and I discovered that 50 percent of all American workers make less than $30,533 a year.  But that is just above poverty level.  In fact, the federal poverty level for a family of five is currently $29,420.  Most families are just barely scraping by from month to month, and most U.S. workers are just one major setback away from falling out of the middle class.
It wasn’t always this way.  At one time, America had the strongest and most vibrant middle class in the history of the world.  But now this latest study has discovered that “it’s only 38 percent of people who get the middle class life or better”
When wages are weighed against the cost of living in the largest 204 metropolitan regions across the nation, 62 percent of jobs don’t pay enough for a dual-income household with children to meet the definition of ‘middle class,’ according to a new ‘Opportunity Index‘ developed by Third Way, a Washington D.C.-based think tank.
‘We were shocked to find out it’s only 38 percent of people who get the middle class life or better,’ said Ryan Bhandari, a policy advisor for Third Way, in an interview with DailyMail.com.
It is no wonder why so many people are shopping at Wal-Mart and the Dollar Tree these days.
For many Americans, those are the literally the only places they can afford to shop.
When I was growing up, it seemed like literally everyone else around me was “middle class”, but now those days are long gone.  Here is a breakdown of some more of the numbers from this latest study
  • 30 percent of jobs are “hardship jobs,” meaning they don’t allow a single adult to make ends meet.
  • 32 percent are “living wage” jobs, enough to get by but not to take vacations, save for retirement or live in a moderately priced home.
  • 23 percent are middle-class jobs, allowing for dining out, modest vacations and putting some money away for retirement.
  • 15 percent are “professional jobs,” paving the way for a more comfortable life that includes more elaborate vacations and entertainment and a more expensive home.
It sure must be nice to be in that top 15 percent.
And the definition of a “middle class income” changes based on where you live.  As the study noted, it is much cheaper to live a middle class lifestyle in the middle of the country than it is to do so on the west coast.  The following comes from the Daily Mail
For example, a worker in San Francisco – one of the most expensive housing markets in the country – must make a minimum of $82,142 to achieve a middle class lifestyle.
By comparison, workers in Cedar Rapids, Iowa can achieve middle class status in a job paying $40,046 or more per year.
So many of us have run ourselves ragged doing the things that we were “supposed” to do, and we assumed that a middle class life would be the reward at the end of the trail.
Unfortunately, that reward has never materialized for millions of hard working Americans.  USA Today profiled one of those deeply frustrated workers in a recent article…
Esther Akutekha, who lives in Brooklyn, New York, has a good job as a public relations specialist that pays more than $50,000 a year.
But because of the $1,440 a month rent on her studio apartment in the Prospect-Lefferts Gardens neighborhood, she never takes vacations, dines out just once a month and scrapes together dinner leftovers for lunch the next day.
Can you identify with Esther?
I sure can.
It can be soul crushing to work as hard as you can only to realize that your goals are now farther away than ever.  At this point, Esther is not even sure that she will ever be able to afford to have children
“I’m frustrated with the fact that I’m not going to be able to save anything because my rent is so high,” says Akutekha, who says she’s 30ish. “I don’t even know if I can afford” to have children.
We have been told that the economy has been “booming” in recent years, but the truth is that it has only been booming for people at the very top of the pyramid.
For most Americans it is as if the last recession never ended, and things just seem to keep getting worse
“There’s an opportunity crisis in the country,” says Jim Kessler, vice president of policy for Third Way and editor of the report. “It explains some of the economic uneasiness and, frankly, the political uneasiness” even amid the most robust U.S. economy and labor market since before the Great Recession of 2007 to 2009. But is the economy robust? Or are we being fed a line by the mainstream media? The middle class is not thriving, and increased regulations and higher taxes make it difficult for people to branch out on their own and create their own business.
We definitely need to make it much, much easier for people to start small businesses, and this is something that I have written about extensively.  Small business creation has traditionally been one of the primary vehicles for upward mobility in our nation, but right now the rate of small business creation is hovering near all-time lows.  We desperately need to get that turned around if we ever want to have any hope of restoring vitality to our middle class.
If we continue on the path that we are on, we are going to continue to get the same results.  Tonight, more than half a million Americans are homeless, and the ranks of the poor are growing with each passing day.
America needs a strong middle class, but currently our middle class is disintegrating at a startling pace.
If we are not able to reverse this trend, what is the future going to look like for our society?
About the author: Michael Snyder is a nationally syndicated writer, media personality and political activist. He is publisher of The Most Important Newsand the author of four books including The Beginning Of The End and Living A Life That Really Matters.

Thursday, November 29, 2018

Cigar-shaped interstellar object may have been an alien probe, Harvard paper claims

A mysterious cigar-shaped object spotted tumbling through our solar system last year may have been an alien spacecraft sent to investigate Earth, astronomers from Harvard University have suggested.
The object, nicknamed 'Oumuamua, meaning "a messenger that reaches out from the distant past" in Hawaiian, was first discovered in October 2017 by the Pan-STARRS 1 telescope in Hawaii.
Since its discovery, scientists have been at odds to explain its unusual features and precise origins, with researchers first calling it a comet and then an asteroid, before finally deeming it the first of its kind: a new class of "interstellar objects."
Now, a new paper by researchers at the Harvard Smithsonian Center for Astrophysics raises the possibility that the elongated dark-red object, which is 10 times as long as it is wide and traveling at speeds of 196,000 mph, might have an "artificial origin."
    "'Oumuamua may be a fully operational probe sent intentionally to Earth vicinity by an alien civilization," they wrote in the paper, which has been submitted to the Astrophysical Journal Letters.
    The theory is based on the object's "excess acceleration," or its unexpected boost in speed as it traveled through and ultimately out of our solar system in January 2018.
    "Considering an artificial origin, one possibility is that 'Oumuamua is a light sail, floating in interstellar space as a debris from an advanced technological equipment," wrote the paper's authors, suggesting that the object could be propelled by solar radiation.
    The paper, written by Abraham Loeb, professor and chair of astronomy, and Shmuel Bialy, a postdoctoral scholar, at the Harvard Smithsonian Center for Astrophysics, points out that comparable light-sails already exist on earth.
    "Light-sails with similar dimensions have been designed and constructed by our own civilization, including the IKAROS project and the Starshot Initiative. The light-sail technology might be abundantly used for transportation of cargos between planets or between stars."
    In the paper, the pair theorize that the object's high speed and its unusual trajectory could be the result of it no longer being operational.
    "This would account for the various anomalies of 'Oumuamua, such as the unusual geometry inferred from its light-curve, its low thermal emission, suggesting high reflectivity, and its deviation from a Keplerian orbit without any sign of a cometary tail or spin-up torques."
    'Oumuamua is the first object ever seen in our solar system that is known to have originated elsewhere.
    At first, astronomers thought the rapidly moving faint light was a regular comet or an asteroid that had originated in our solar system.
    Comets, in particular, are known to speed-up due to a process known as "outgassing," in which the sun heats up the surface of the icy comet, releasing melted gas. But 'Oumuamua didn't have a "coma," the atmosphere and dust that surrounds comets as they melt.
    Multiple telescopes focused on the object for three nights to determine what it was before it moved out of sight.
      "We are fortunate that our sky survey telescope was looking in the right place at the right time to capture this historic moment," NASA Planetary Defense Officer Lindley Johnson said in a statement last year.
      "This serendipitous discovery is bonus science enabled by NASA's efforts to find, track and characterize near-Earth objects that could potentially pose a threat to our planet."

      Saturday, November 24, 2018

      The Best Water Purification Methods

      Water is second only to air when it comes to survival. Without water, you cannot survive for more than three days. In other words, in any survival situation, whether the collapse of society has finally arrived or you are stranded in the bush for an unknown amount of time, having a way to purify water can literally mean the difference between life and death.
      There are a number of effective ways to purify water while on the go. If you find water and don’t take the time and effort to purify it, you might end up making yourself really sick, which won’t help your survival situation. Knowing the many ways to purify water and having at least two or three of these methods at your disposal wherever you are will ensure you are well hydrated and can focus on other aspects of survival, such as getting food and finding or making shelter.

      Why the Need for Water Purification

      Water is not as clean as it looks, despite the fact that we use it to clean ourselves and our clothes and dishes. Even when you see a beautiful river or stream flowing that looks crystal clear, there are still things in that water that could make you sick. Many bacteria, viruses, and protozoa (a single-celled organism), as well as other types of impurities thrive in the lakes, rivers, and streams from which we take our drinking water. The water that gets piped into our homes is purified before it flows through the pipes to us, but if you get it right out of the river or lake, then you need to purify it yourself.
      When I say that these things can make you sick, you might be wondering how sick. Well, to put simply, you could get a bad case of diarrhea or you could become infected with something so nasty that you will die. Yes, death can be an outcome to drinking unpurified water, so you should NOT take any chances. Some symptoms of drinking unpurified water include abdominal pain, diarrhea, vomiting, fever, fatigue, and weight loss. There are many potential consequences to drinking unpurified water, including catching:
      • Infectious diseases
      • Diarrhea from pathogens such as E. Coli
      • Hepatitis A
      • Cholera (comes from drinking water in which there are feces); this is very deadly
      • Amoebiasis (caused by a protozoa that lives in water or sewage containing flies)
      You can also ingest the following from unpurified water:
      • Chemicals from farm runoff, household waste, and industrial waste
      • Pesticides
      • Lead
      • Heavy metals, such as arsenic

      Methods of Water Purification

      There are many ways to purify water. Some of these you can prepare for ahead of time, such as when you are at your bug-in or bug-out locations or you have packed the necessary equipment/chemicals to carry with you when you are in the bush. There are also times when you might find yourself without convenient methods of water purification and have to wing it. The following are the best methods of water purification whether you have planned ahead of time or you need to purify water on the go, without prior planning.

      Boiling It

      The simplest method to purify water is to boil it. As long as you can start a fire or have a stove or some means of heating water to the boiling point and you have a pot or other metal container in which to put the water, you can purify it. Once the water reaches 100 degrees Celsius and remains at a rapid or rolling boil for at least 1 minute (3 minutes at altitudes of more than 5,000 feet/1,000 meters), it will kill off all the harmful bacteria, viruses, and protozoa in the water. Once the water has cooled down, it can be used for drinking. One of the major downfalls of this method is that it will not rid the water of any chemicals or metals.

      Chemical Treatments

      Chemicals can be used to purify water and this is perhaps the second easiest way to accomplish this goal. There are many chemicals that can be used to purify water. Perhaps the most readily available in a bug-in situation are bleach and iodine.
      There are also chemicals that come in the form of crystals, tablets, or liquids that are designed for people to carry with them when hiking or camping. Here is a list of chemicals and how to use them:
      Bleach: Make sure the bleach is pure, with no additional cleaners or scents added. You also want to ensure it is not color-safe bleach. Add 1/8 teaspoon of bleach to one gallon of water and let it sit for at least 30 minutes. DO NOT add more bleach than this as it can be harmful to humans at higher concentrations.
      Iodine: Use 2% tincture of iodine and add 5 drops per liter of water and 10 drops per liter if the water is cloudy. Let it sit for at least 30 minutes. DO NOT use more than this as too much iodine can be harmful to humans, particularly to children and pregnant or nursing women.
      Hydrogen Peroxide: Use 3%-10% diluted hydrogen peroxide. Because it is a weaker microbiocide, you will need more of it. Use 1/8 cup to one gallon of water. Keep in mind that this is not a method of water purification that is approved by the U.S. Environmental Protection Agency, but it is useful to know in a pinch.
      Tablets and crystals: There are different types of water purification tablets and crystals, all of which are designed to simply be dropped into the water. Iodine and potassium permanganate can come in tablet- or crystal-form. Sodium chlorite (a form of chlorine) comes in tablet-form.
      When it comes to using prepackaged chemical water treatments, please always follow the manufacturer’s directions on the product packaging. These directions will vary depending on the type of chemical being used. It is also useful to swish the water in the container when adding water purification tablets to help spread the dissolved components throughout the water.

      Microfiltration and Ultrafiltration

      Simply filtering water through a cloth, even a finely woven one, will not purify your water; it will remove larger particles and make the water look more visually appealing. It certainly doesn’t hurt to filter your water before you purify it. But if you apply microfiltration or ultrafiltration, to the water, you can remove harmful bacteria and other impurities that could make you sick.
      Microfiltration has an average pore size of 0.1 micron and will effectively remove protozoa from the water. However, it is only moderately effective at removing bacteria and it will not remove viruses or chemicals. Ultrafiltration has an average pore size of 0.01 micron. It is very effective in the removal of protozoa and bacteria, is moderately effective in the removal of viruses, and has a low level of effectiveness of removing chemicals.
      lifestraw bottleThere are many commercial water filters on the market that will provide microfiltration of water. They come in all shapes and sizes. Some are simple filter straws, such as the LifeStraw,  which are easy to carry and can be used anywhere. Some, such as Sawyer’s Personal Water Bottle and Vestergaard’s LifeStraw Go, are water bottles that have a built in filter. Others, such as the MSR MiniWorks , use a ceramic filter and will attach to the top of a standard Nalgene water bottle or MSR Dromedary bag.

      Solar Distillation

      Distillation is a method of allowing water to evaporate and then re-condense on a surface from which it can be transferred into a container. Distillation can be a slow process, but is effective, particularly if you use a solar still. If you are in the bush or field and you need to purify water, use a clear or translucent sheet of plastic and secure it over a hole that is 3 feet deep. Place a rock in the center on top of the plastic and a container in the center of the bottom of the hole and allow the sun to work its magic.
      As the water evaporates, it will condense on the underside of the plastic and will run down and drip into the container. You can put water from a river or lake into the hole to distill it, or if you are attempting to distill water from the moisture in the ground itself, you can add vegetation or even urine to the hole to increase the level of moisture that can be distilled. A great demonstration can be seen in the next video:

      In a Pinch

      No one wants to be without water, but if you find yourself in the wild with no equipment or tools of any kind, you still have an option left. Ultimately, if you can’t find a way to purify the water, then you might have to drink right from the source. Try to find running water, as this is better than standing water, and try to find a location as far away from animal traffic as possible.
      When you find the body of water, be it a lake, river, or stream, go far enough away from the edge of the water that the vegetation has begun to grow. Then go about two or three feet beyond the edge of the vegetation and dig a hole. Dig down until water begins to seep into the hole. This water will be filtered by the sand, soil, and roots of the surrounding vegetation, but it is not guaranteed to be completely clear of pathogens.
      Remember that this option is a last resort, but if you are dying of thirst (literally), then this is the best option left to you. Then all you can do is hope you don’t get sick, and if you don’t, then remember where your watering hole is so you can come back to it if you need to. A safe place to drink water is life!

      Tuesday, November 20, 2018

      There are mountains of old tires out there. Americans keep on rolling and tires keep on wearing out. Every year there is almost one scrap tire created for every man, woman, and child in the United States. In 2001 alone, Americans discarded nearly 281 million tires, weighing some 5.7 million tons. All of those old treads can provide a lot of good growing space, and we’re just the folks to put them to use.
      There is no appreciable risk in using recycled tires in the vegetable garden. While it is a fact that rubber tires do contain minute amounts of certain heavy metals, the compounds are tightly bonded within the actual rubber compound and do not leach into the soil. One of the ingredients in the rubber recipe is zinc. Zinc, in fact, is an essential plant element. I also expect that rubber is safer to use than treated lumber that contains copper and arsenic. Tires are durable. The very qualities that make them an environmental headache make them perfect for our uses in the garden. Once they are in place, they won’t rot and will likely be there for your grandchildren to use.
      Let’s take a look at some ways to recycle old tires and literally reap the benefits. Gardening with recycled tires has many benefits besides those directly with the garden itself. It puts to use an article that might otherwise end up in a landfill or other disposal site. Those of us who are into “growing our own” are often on the lookout for ways to increase production with a minimum of effort. Gardening with tires presents several good ways to do just that, while at the same time helping to recycle the old treads from our automobiles and other wheeled conveyances. Stop by your local service station, recycle center, or tire retailer and ask them to save some tires for you. Currently, dealers charge $2 or more to dispose of used tires. Since they charge the consumer to take the old tires and have to pay to have them disposed of, they will likely be happy to let you have all you want. Most tire centers will have a stack of old tires out back that they will give you permission to root through.

      A rubberized hotbed

      As winter’s icy grasp finally begins to slip, the homesteader who has not kept a little something growing all winter is surely thinking about getting a few seeds stuck into the ground. After a long winter of dried, canned, frozen, or store-bought fresh vegetables, a mess of fresh veggies would taste mighty good. One of the easiest and earliest ways to get those first lettuce and spinach salads growing is to use an old method that has been common practice around these parts for generations.
      Folks around here often get those first salad greens going in a planter made from an old tire. For my own planter, I utilized the old tread from a log skidder to give me plenty of size and depth. For a project of this type, I’d recommend a fairly large one, such as a rear tire off of a farm tractor or from a log skidder like I used.

      Tires newly planted with spinach seed in the fall greenhouse.
      After laying the tire at the spot where I wanted it, I used a utility knife to cut the sidewall completely out of the upper side. This was fairly easy to do, and nearly doubled the planting area available. But do it carefully, and consider using some leather gloves as protection against the knife blade.
      Once I removed the sidewall, I filled the tire with some good compost on top of a six-inch layer of fresh manure and seeded my lettuce and spinach. The heat generated by the manure’s decomposition helped to heat the seedbed from below. The whole thing was covered with some old storm windows obtained for the purpose by some creative scrounging. The result was a fine durable hot bed and the only cost involved was for the seed.

      Raising the roots

      One of the best ways to grow vegetables, especially in cool climates, is to grow them in raised beds. Let’s look at some of the benefits of raised bed gardening and how the method is a great way to use old tires:
      • When the soil is elevated, it warms faster. Raised bed gardens can increase spring soil temperatures by 8 to 13° F over the adjacent soil temperatures at ground level. The black, heat-absorbing tires compound the warming effect.
      • It dries out more quickly. These rubberized raised beds are helpful in improving water drainage in heavy clay soils or in low-lying areas. The soil is more exposed, and sun and wind help to dry and warm the soil more quickly.
      • It provides deeper soil for root crops to develop.
      • You can plant earlier in the season and get your plants off to a healthier and earlier start. This is especially true in cooler climates where spring rains often keep vegetable garden soil wet and cold. In containers such as our tires, excess moisture tends to drain away more quickly and the soil remains warmer, thus allowing for earlier planting.
      • You can harvest later into the fall.
      • Because of the longer growing season, you have the possibility of growing a wider range of vegetables.
      • Using these beds, you can concentrate a greater number of plants in a smaller area. This will result in less weeding and greater production.
      • Finally, and not insignificantly, raised bed gardening puts plants and soil back into the reach of older gardeners or others who cannot do a lot of bending as required with an ordinary garden.

      In the greenhouse

      Here is one way we have used tires in our own small greenhouse. Along the front wall we placed short stacks of tires and filled them with sand. The dark color of the tires serves to absorb heat, and the sand contained in each stack helps to store it. Atop each stack was placed another tire with the upper sidewall removed as already described.The top tire was then filled with compost and soil then seeded in lettuce, spinach, or whatever.
      We’ve also found that, in the greenhouse, they make a fine planter for an extra-early or late tomato plant. Since our greenhouse is attached to my garage and shop, I utilized an existing window opening, the woodstove in the garage, a window fan, and a timer to add heat to it. Between our tire planter, keeping a fire going in the garage—which I often do anyway—and timing the fan to turn on as the day begins to cool, we have been able to pick the last tomato off of the vine on Christmas Eve.

      Jump start your tomatoes

      By the same token, you can get a jump on the spring growing season by creating a mini-greenhouse, of sorts, for a few tomato plants. Once you have a stack or two of tires in place, set your tomato plants in each stack. Next, place a wire hoop or tomato cage in place around the plant. Cover the cage with clear plastic and secure it with duct tape, twine, etc. If you have them available, you can place an old windowpane over the top of this tomato tower. The combination of the black rubber tires and the clear plastic “greenhouse” will cause the plant to grow quickly.
      You will need to monitor the heat and health of the young plants carefully to make sure they aren’t getting too much of a good thing. Once the plant is really growing and the chance of frost is past, simply remove the plastic and allow the plant to use the wire cage to support its branches, which will soon be laden with fruit.
      You can add months to your growing season using this method alone.

      Tire compost bin

      Used tires can also be made into a good compost bin. Begin with a half dozen or so tires as large as you can handle. Large truck tires work well. Cut the sidewalls out of both sides using the sharp utility knife. You will end up with rubber rings of tire treads. After you have several of the hoops made, place one on the spot where you want your bin to be located. Be sure to turn the soil on the spot where you place the bin. This better exposes the composting material to the bacteria, earthworms, and other compost builders. As you fill the first tire hoop, merely place another atop it and fill it. Repeat the process until you have them stacked five or six high. You can keep filling tires with garden and kitchen scraps and other compost fixin’s or just start another pile.
      After the compost has worked for several weeks, remove the top hoop and place it on the ground beside the original bin. Fork the top layer of composting material into this hoop. Remove the next hoop and place it atop the one on the ground and move the plant material into it. Repeat until you have the whole compost heap turned and transferred into the restacked hoops, one at a time. Note that in the process you have completely turned the working compost pile from top to bottom, perfect for producing good compost in record time. After several more weeks, the compost should be getting that good earthy smell and will be ready to use.

      Potato stacks

      When I was a youngster, I used a hoe to ridge up rows and rows of potatoes, pulling the soil up around the plants to help increase their yield. I have since learned of an easier way to grow potatoes that doesn’t require any hoeing—just plant a vertical potato patch. If you are limited in space, then this method is especially beneficial. You can grow a nice crop of spuds in just a few tires. Here’s how:
      Generally, a stack of four or five tires that are progressively filled with some good compost and a couple of pounds of seed potatoes will produce around 25 pounds of potatoes. A few of these stacks can provide your winter’s supply of potatoes with no problem.

      Use a utility knife to cut the sidewall completely out of the upper side.
      To begin, pick a spot that is out of the way and perhaps out of sight where you can stack your tires. Loosen the soil just enough to allow for some drainage and place the first tire. Fill it with soil, being sure to fill the inside of the tire casing as well. Take your seed potatoes and cut them into pieces that have at least two “eyes,” or sprout buds in each piece. It doesn’t hurt to let each piece dry for a day or two before planting it. Plant three or four cut potato sets into the soil in the tire center. Cover the sets with enough soil to bring it level with the top of the opening.
      Once the new potato plants get to be about eight inches tall, add another tire and add soil around the plants until just a couple of inches of the tops are above the soil. Repeat this process for the third and subsequent tires. As you add tires and soil to the ‘tater stack, the plant stalk is covered with soil. As you do this, the existing stalk will send off roots as well as grow upward to once again find the sunlight it needs. Since you are gradually raising the soil level eight inches or so at a time, the plant is able to keep growing without suffocating. At the same time, you are creating a 24- to 36-inch tap root off of which many lateral roots will develop. Each of the lateral roots can produce additional potatoes at three or four levels instead of only one. When you water the plant, be sure that the soil is thoroughly moistened all the way down to the base of the pile.
      Since the tires also act as an insulator and heat sink for your potatoes, the added warmth will stimulate the lateral roots to multiply more quickly, giving you more potatoes. To harvest your crop, wait until the top dries up and begin to remove the tires, working your way down the stack and harvesting the potatoes as you go.

      Tires can even be used to create retaining walls to stabilize an earth bank. When using them for this purpose, begin by laying a level course of tires. Fill these tires completely with sand, soil, or gravel. Try to eliminate any holes or pockets in the tires that might provide a haven to vermin like mice or rats. Atop the first course of filled tires, add another row, positioning them one-quarter to one-third of the way back on the first course. This will give the wall some slope and add stability. Also, place the tires with staggered joints, that is, in bricklayer-fashion. That will add a lot of stability as well. Once several courses of these rubber building blocks are in place, the wall should be very solid and immovable.Great walls of tires

      If you choose to, remove the upper sidewall of each tire before you put it in place, and fill it with soil. Not only will it make filling the tires easier, but it will also make space available to place some ground cover plants that can grow and cover the wall. You may consider even setting strawberry plants in the spaces.

      All-terrain planters

      Try using old tires from riding mowers and all-terrain-vehicles (ATVs) for planters. They can be used right on the deck, porch, or patio and can hold plants such as cherry tomatoes, peppers, flowers, herbs, and other compact plants. They are smaller and therefore more portable than large tires and can fit in most any out-of-the-way spot.
      Check out a tire dealer, lawn tractor dealer, or ATV dealer to locate some of the used low-pressure tires. Take one of the tires and cut the sidewall as described for the hotbed. Using a drill, bore three holes around the open end of the “bowl.” Space the holes equally around the rim and drill them about a half-inch from the top edge.
      You may wish to place your planters around on a low wall or rail, but you can also attach a hanger from which to suspend the planter. Using three pieces of workable wire about 26 to 28 inches long, attach one wire in each of the three holes. Bring the wires together at the top and twist about 2 to 3 inches together into a hook. That will serve as the planter hanger.
      Now, cut a piece of hardware cloth to fit in the bottom of the planter. Place a thick layer of grass, moss, or even a chunk of old carpet into the bottom, on top of the hardware cloth. Fill to the top with soil, and you are ready to set your plants. These are especially handy for growing cherry tomatoes or the attractive Thai pepper plants.

      Tiers of tires

      Another nifty planter for small spaces can be made by stacking four tires of different sizes into a sort of pyramid. Begin with one each of the following sized tires: A farm tractor tire; a tire from a large truck; an automobile tire; and an ATV tire. Cut the sidewall out of each. Place the tractor tire where you want it and fill it with soil. Position the next largest tire, the truck tire, evenly atop the tractor tire. Fill it, too, with soil. Next, put the automobile tire in place and fill it. Finally, place the ATV tire atop the pile and fill it with soil. You will end up with a multi-layered vertical garden that is useful for strawberries, bush cucumbers, varieties of low flowers, and many other types of plants. With some imagination, you can have plants cascading down the sides of this planter.

      On a larger scale

      If your place is a bit larger than just a plot and garden, you may find more uses for old tires. Here are just a couple of ideas:
      Over in the neighboring Amish settlement, I see many horse feeders made by cutting the sidewall out of a tire off of a large payloader or other machine with wide, heavy tires. They are deep enough to hold a lot of hay, and even the largest Belgian horse cannot damage them. They would make an equally large and roomy planting bed for flowers or vegetables.
      You can make a really good pasture drag by bolting some tires together and connecting them to a single beam to be pulled behind the tractor, team, or even the pickup truck or ATV. The handy homemade drag will make it much easier to break up and distribute the cowflops that accumulate in the pasture. Scattering the cowpies spreads the fertilizer they contain and prevents hot spots and clumps of pasture grass.

      More uses for old tires

      • Use single rows of tires and use mulch or gravel between rows. You will have easy access to all sides of your plants and will keep weeding to a minimum.
      • When doing any of these projects, it’s okay to use tires of different sizes. Exposed spaces can be used to tuck a plant into.
      • Set blackberries, raspberries, and other brambles out in rows of tires—one plant to a tire. They will benefit from the same “raised bed” principle and will be easier to prune back and to mulch.
      • If you can place a few tires in a row along a wall or garden edge, try adding a heavy wire cattle panel or simply a length of woven fence wire as a trellis for vining plants to climb. You can save a lot of space by growing beans, cucumbers, squash, gourds, and other climbers this way.
      • When arranging three or four tires in a square or triangle, make use of the space between the tires instead of just mulching it. Just fill it with compost and add another plant or two. You will gain another square foot or so of good growing space.
      • Go commercial. With a serious rubberized garden, it would be possible to supply every restaurant and grocery store for miles around. Organically grown fresh garden vegetables are always in demand. If you go big and create a growing patch of 50 to 100 tires, you can produce hundreds of pounds of vegetables and some good income. For example, with tomatoes selling for 50 cents a pound or more, you can make good money from your “tired” tomato patch. Starting them in the tires will help you to get them to marketable size earlier than other locally grown competition.
      Using old tires is a great way to recycle. It’s also a wonderful way to make the most of a small garden plot and generally increase your garden yield. Try some of these ideas, and I’m certain you’ll see good results.